The Kestrel 2-Axis Metrology System
Vision Engineering’s Kestrel (2-Axis Metrology system), is being used by a manufacturer of injection molded automotive components because of its accuracy and repeatability of measuring automotive components.
The non-contact measuring solution allows engineers to measure the injection molded and insert molded components without touching the part, which can sometimes lead to deformities.
With pure optics, the Kestrel can measure down to tens of microns allowing engineers to provide accurate results to colleagues and customers.
Typical insert molded components include: a center body molding that fits into a gearbox, made from 64% glass filled polyphthlamide and then insert molded with silver plated glass; and a drive by wire throttle which has a PCB inserted into the mold which detects movement.
The Kestrel is an essential part of their stringent quality processes for these critical components. Both X and Y axis are measured for accuracy and surface finish can be simultaneously inspected.
Benefiting from a range of options and accessories including a video camera and optical enhancements such as an episcopic illuminator, for inspecting bore and blind holes, the Kestrel can be configured to most shop floor requirements.
For more information on the Kestrel measuring microscope and its capabilities, visit www.visioneng.us/kestrel
Tags: 2-axis metrology, automotive, injection moulding, insert moulding, measuring automotive components, measuring injection mouldings, measuring insert mouldings, measuring microscope, measuring without a touch probe, measuring without deformation, non-contact measurement, non-contact measuring